....................................../////.===Shadow-Here===./////................................................ > < > < > < > < > < > < > < > < > < > < > < > < > < > < > < > < > < > < > < > < > < > < > < > < > < > < > < > < > < ------------------------------------------------------------------------------------------------------------------- /////////////////////////////////////////////////////////////////////////////////////////////////////////////////// RIFF¤ WEBPVP8 ˜ ðÑ *ôô>‘HŸK¥¤"§£±¨àð enü¹%½_F‘åè¿2ºQú³íªú`N¿­3ÿƒügµJžaÿ¯ÿ°~¼ÎùnúîÞÖô•òíôÁÉß®Sm¥Ü/ ‡ó˜f£Ùà<˜„xëJ¢Ù€SO3x<ªÔ©4¿+ç¶A`q@Ì“Úñè™ÍÿJÌ´ª-˜ÆtÊÛL]Ïq*‘Ý”ì#ŸÌÏãY]@ê`¿ /ªfkØB4·®£ó z—Üw¥Pxù–ÞLШKÇN¾AkÙTf½è'‰g gÆv›Øuh~ a˜Z— ïj*á¥t d£“uÒ ¨`K˜¹ßþ]b>˜]_ÏÔ6W—è2r4x•íÖ…"ƒÖNîä!¦å Ú}ýxGøÌ —@ ;ÆÚŠ=ɾ1ý8lªË¥ô ^yf®Œ¢u&2©nÙÇ›ñÂñŒ³ aPo['½»øFùà­+4ê“$!lövlüÞ=;N®3ð‚õ›DÉKòÞ>ÄÍ ¥ˆuߤ#ˆ$6ù™¥îŠ‡y’ÍB¼ çxÛ;X"WL£R÷͝*ó-¶Zu}º.s¸sšXqù–DþÿvªhüïwyŸ ¯é³lÀ:KCûÄ£Ëá\…­ ~—ýóî ¼ûûÜTÓüÇy…ŽÆvc»¾×U ñ¸žþоP÷¦ó:Ò¨¨5;Ð#&#ÖúñläÿÁœ GxÉ­/ñ‡áQðìYÉtÒwŽ¼GÔ´zàÒò ð*ëzƒ•4~H]Ø‹f ñÓÈñ`NåWçs'ÆÏW^ø¹!XžµmQ5ÃËoLœÎ: ÞËÍ¥J ù…î èo£ßPÎñ¶ž8.Œ]ʵ~5›ÙË-ù*8ÙÖß±~ ©¹rÓê‚j¶d¸{^Q'˜±Crß ÚH—#¥¥QlÀ×ëã‡DÜ«èî þ&Çæžî;ŽÏºò6ÒLÃXy&ZŒ'j‚¢Ù€IßÚù+–MGi‰*jE€‘JcÜ ÓÌ EÏÚj]o˜ Þr <¾U ûŪæÍ/šÝH¥˜b”¼ ÁñßX GP›ï2›4WŠÏà×£…íÓk†¦H·ÅíMh–*nó÷à]ÁjCº€b7<ب‹¨5車bp2:Á[UªM„QŒçiNMa#<5›áËó¸HýÊ"…×Éw¹¦ì2º–x<›»a±¸3Weü®FÝ⑱ö–î–³|LPÈ~çð~Çå‡|º kD¢µÏàÆAI %1À% ¹Ò – ”ϝS¦‰4&¶£°à Öý”û_Ò Áw°A«Å€?mÇÛgHÉ/8)á¾ÛìáöŽP í¨PŸNÙµº¦‡§Ùš"ÿ«>+ªÕ`Ê÷‡‚ß Õû˜þãÇ-PÍ.¾XV‘€ dÜ"þ4¹ ±Oú‘©t¥¦FªÄÃÄ•b‚znýu½—#cDs˜ÃiÑOˆñ×QO=*IAÊ,¶ŽZƒ;‡wøXè%EÐk:F±Ú” .Ѽ+Áu&Ç`."pÈÉw o&¿dE6‘’EqTuK@Ì¥ã™À(Êk(h‰,H}RÀIXÛš3µ1©_OqÚÒJAñ$ÊÙÜ;D3çŒ[þùœh¬Ã³™ö6ç†NY".Ú‰ï[ªŸŒ '²Ð öø_¨ÂÉ9u鶳ÒŠõTàîMØ#û¯gN‡bÙ놚X„ö …ÉeüÌ^J ‹€.œ$Æ)βÄeæW#óüßĺŸ€ ÀzwV 9oä»f4V*uB «Ë†¹ì¯žR霓æHXa=&“I4K;¯ç‹h×·"UŠ~<•â•ªVêª&ÍSÃÆÅ?ÔqÎ*mTM ˜›µwêd#[C¡©§‘D<©àb†–ÁœøvH/,í:¯( ²£|4-„Æövv„Yͼ™^Á$ˆ„¢Û[6yB.åH*V¨æ?$=˜Ñ€•î¦ñ·­(VlŸ‘ nÀt8W÷´Bûba?q9ú¶Xƒl«ÿ\ù¶’þòUÐj/õ¢Ìµ³g$ƒÎR!¸»|Oߍë’BhîÚÑ¢ñåŒJ„®„£2Ð3•ô02Nt…!£Í]Ïc½Qÿ?ˆ<&ÃA¾Ú,JˆijÌ#5yz„‰Î|ÊŽ5QÏ:‹ÐaóVÔxW—CpeÏzÐïíçôÿÅ_[hãsÐ_/ŽTÝ?BîˆííV$<¿i>²F¬_Eß¿ †bÊŒº­ÿ®Z H“C}”¬,Mp ý/Bá£w>˜YV°aƒúh+cŠ- r/[%|üUMHäQ°X»|û/@|°¥Ð !BÔ Ç¢Ä©š+Õì D«7ìN¶ŽðÔ " ƶ’ÖçtA‰Û×}{tþz­¾GÍ›k¹OEJR$ Â׃ «ëÁ"oÉôž$oUK(Ä)Ãz³Ê-‹êN[Ò3Œñbï8P 4ƒ×q¢bo|?<ÛX¬òÄÍ°L–±›(™ûG?ýË©ÚÄ–ÂDØÐ_Ç¡ô ¾–ÄÏø ×e8Ë©$ÄF¹Å‹ì[©óìl:F¾f´‹‹Xì²ï®\¬ôùƒ ÿat¥óèÒùHß0äe‚;ü×h:ÆWðHž=Ã8骣"kœ'Y?³}Tûè€>?0l›e1Lòñ„aæKÆw…hÖŠùW…ÈÆÄ0ši·›[pcwËþñiêíY/~-Á5˜!¿†A›™Mÿþ(±“t@â“ö2­´TG5yé]çå僳 .·ÍïçÝ7UÚ±Ð/Nè»,_Ï ùdj7\ï Wì4›„»c¸àešg#ÒÊ⥭áØo5‘?ÌdÝô¯ ¹kzsƒ=´#ëÉK›Ø´±-¥eW?‡çßtòTã…$Ý+qÿ±ƒ÷_3Ô¥í÷:æ–ž<·Ö‡‰Å¢ š‡%Ô—utÌÈìðžgÖÀz²À—ï÷Óîäõ{K'´È÷³yaÏÁjƒô}ž§®æÊydÕÈë5¯èˆõvÕ©ã*çD„ “z„Ó‡^^xÂ3M§A´JG‚öï 3W'ˆ.OvXè¡ÊÕª?5º7†˜(˜Ç¶#çê’¶!ÌdZK§æ 0fãaN]òY³RV ™î$®K2R¨`W!1Ôó\;Ý ýB%qæK•&ÓÈe9È0êI±žeŸß -ú@žQr¦ ö4»M¼Áè¹µmw 9 EÆE_°2ó„ŸXKWÁ×Hóì^´²GѝF©óäR†¦‰ç"V»eØ<3ùd3ÿÚ¤Žú“Gi" —‘_ÙËÎ~Üö¯¥½Î»üŸEÚŽåmÞþí ;ÞólËΦMzA"Âf(´òá;Éï(/7½ûñÌ­cïÕçлþÝz¾-ÍvÑ“pH­–ðÓj$¸Äû¤‚‘ãUBË-n“2åPkS5&‹Â|+g^œ®Ì͆d!OïäîU«c;{Û!ÅŽ«ëZ9Ókóˆ]¯ƒ›né `ÇÒ+tÆš (ØKá¾—=3œ®•vuMñg²\ï Ec€ 05±d™‡×iÇ×›UúvÌ¢£Èþ¡ÕØô¶ßÎA"ß±#Ö²ˆÊŸ¦*Ä~ij|àø.-¼'»Ú¥£h ofº¦‡VsR=N½„Î v˜Z*SÌ{=jÑB‹tê…;’HžH¯8–îDù8ñ¢|Q•bÛçš–‹m³“ê¨ åÏ^m¬Žãþ©ïêO‡½6] µÆ„Ooòü ²x}N¦Ë3ïé¿»€›HA˜m%çÞ/¿í7Fø“‹léUk)É°Œµ8Q8›:ÀŠeT*šõ~ôڝG6 ¢}`ùH­–”¡k ‰P1>š†®9z11!X wKfmÁ¦xÑ,N1Q”–æB¶M…ÒÃv6SMˆhU¬ÊPŽï‘öj=·CŒ¯u¹ƒVIЃsx4’ömÛýc塶7ßŠß 57^\wÒÐÆ k§h,Œý î«q^R½3]J¸ÇðN ‚çU¬ôº^Áì} ³f©Õœ§ˆã:FÄÈ‚é(€™?àýÓüè1Gô£¼éj‚OÅñ  #>×—ßtà 0G¥Åa뀐kßhc™À_ÉñÞ#±)GD" YîäË-ÿÙ̪ ¹™a¯´¢E\ÝÒö‚;™„ë]_ p8‰o¡ñ+^÷ 3‘'dT4œŽ ðVë½° :¬víÑ«£tßÚS-3¶“þ2 †üüʨòrš¹M{É_¤`Û¨0ìjœøJ‡:÷ÃáZ˜†@GP&œÑDGÏs¡þ¦þDGú‘1Yá9Ôþ¼ ûø…§÷8&–ÜÑnÄ_m®^üÆ`;ÉVÁJ£?â€-ßê}suÍ2sõA NÌúA磸‘îÿÚ»ƒìö·á¿±tÑÐ"Tÿü˜[@/äj¬€uüªìù¥Ý˜á8Ý´sõj 8@rˆð äþZÇD®ÿUÏ2ùôõrBzÆÏÞž>Ì™xœ“ wiÎ×7_… ¸ \#€MɁV¶¥üÕÿPÔ9Z‡ø§É8#H:ƒ5ÀÝå9ÍIŒ5åKÙŠ÷qÄ>1AÈøžj"µÂд/ªnÀ qªã}"iŸBå˜ÓÛŽ¦…&ݧ;G@—³b¯“•"´4í¨ôM¨åñC‹ïùÉó¯ÓsSH2Ý@ßáM‡ˆKÀªÛUeø/4\gnm¥‹ŸŒ qÄ b9ÞwÒNÏ_4Ég³ú=܆‚´ •â¥õeíþkjz>éÚyU«Íӝ݃6"8/ø{=Ô¢»G¥ äUw°W«,ô—¿ãㆅү¢³xŠUû™yŒ (øSópÐ 9\åTâ»—*oG$/×ÍT†Y¿1¤Þ¢_‡ ¼ „±ÍçèSaÓ 3ÛMÁBkxs‰’R/¡¤ˆÙçª(*õ„üXÌ´ƒ E§´¬EF"Ù”R/ÐNyÆÂ^°?™6¡œïJ·±$§?º>ÖüœcNÌù¯G ‹ñ2ŠBB„^·úìaz¨k:#¨Æ¨8LÎõލ£^§S&cŒÐU€ü(‡F±Š¼&P>8ÙÁ ‰ p5?0ÊƃZl¸aô š¼¡}gÿ¶zÆC²¹¬ÎÖG*HB¡O<º2#ñŒAƒ–¡B˜´É$¥›É:FÀÔx¾u?XÜÏÓvN©RS{2ʈãk9rmP¼Qq̳ è¼ÐFׄ^¡Öì fE“F4A…!ì/…¦Lƒ… … $%´¾yã@CI¬ á—3PþBÏNÿ<ý°4Ü ËÃ#ØÍ~âW«rEñw‹eùMMHß²`¬Öó½íf³:‹k˜¯÷}Z!ã¿<¥,\#öµÀ¯aÒNÆIé,Ћ–lŽ#Àæ9ÀÒS·I’½-Ïp Äz¤Š Â* ­íÄ9­< h>׍3ZkËU¹§˜ŒŠ±f­’¤º³Q ÏB?‹#µíÃ¥®@(Gs«†vI¥Mµ‹Á©e~2ú³ÁP4ìÕi‚²Ê^ö@-DþÓàlÜOÍ]n"µã:žpsŽ¢:! Aõ.ç~ÓBûH÷JCÌ]õVƒd «ú´QÙEA–¯¯Œ!.ˆˆëQ±ù œ·Ì!Õâ )ùL„ÅÀlÚè5@B…o´Æ¸XÓ&Û…O«˜”_#‡ƒ„ûÈt!¤ÁÏ›ÎÝŠ?c9 â\>lÓÁVÄÑ™£eØY]:fÝ–—ù+p{™ðè û³”g±OƒÚSù£áÁÊ„ä,ï7š²G ÕÌBk)~ÑiCµ|h#u¤¶îK¨² #²vݯGãeÖ϶ú…¾múÀ¶þÔñ‚Š9'^($¤§ò “š½{éúp÷J›ušS¹áªCÂubÃH9™D™/ZöØÁ‡¦ÝÙŸ·kð*_”.C‹{áXó€‡c¡c€§/šò/&éš÷,àéJþ‰X›fµ“C¨œ®r¬"kL‰Â_q…Z–.ÉL~O µ›zn‚¹À¦Öª7\àHµšÖ %»ÇníV[¥*Õ;ƒ#½¾HK-ÖIÊdÏEÚ#=o÷Óò³´Š: Ç?{¾+9›–‘OEáU·S€˜j"ÄaÜ ŒÛWt› á–c#a»pÔZÞdŽtWê=9éöÊ¢µ~ ë ;Öe‡Œ®:bî3±ýê¢wà¼îpêñ¹¾4 zc¾ðÖÿzdêŒÑÒŝÀ‰s6¤í³ÎÙB¿OZ”+F¤á‡3@Ñëäg©·Ž ˆèª<ù@É{&S„œÕúÀA)‰h:YÀ5^ÂÓŒ°õäU\ ùËÍû#²?Xe¬tu‰^zÒÔãë¼ÛWtEtû …‚g¶Úüâî*moGè¨7%u!]PhÏd™Ý%Îx: VÒ¦ôÊD3ÀŽKÛËãvÆî…N¯ä>Eró–ð`5 Œ%u5XkñÌ*NU%¶áœÊ:Qÿú»“úzyÏ6å-၇¾ ´ ÒÊ]y žO‘w2Äøæ…H’²f±ÎÇ.ª|¥'gîV•Ü .̘¯€šòü¤U~Ù†*¢!?ò wý,}´°ÔÞnïoKq5µb!áÓ3"vAßH¡³¡·G(ÐÎ0Îò¼MG!/ài®@—¬04*`…«é8ªøøló“ˆÊ”èù¤…ßÊoÿé'ËuÌÖ5×È¡§ˆˆfŽë9}hìâ_!!¯  B&Ëö¶‰ÀAÙNVŸ Wh›¸®XÑJì¨ú“¿÷3uj²˜¨ÍÎìë±aúŠÝå¯ð*Ó¨ôJ“yºØ)m°WýOè68†ŸÏ2—‰Ïüꪫٚ¥‹l1 ø ÏÄFjêµvÌbü¦èÝx:X±¢H=MÐß—,ˆÉÇ´(9ú¾^ÅÚ4¿m‡$âX‘å%(AlZo@½¨UOÌÕ”1ø¸jÎÀÃÃ_ µ‘Ü.œº¦Ut: Æï’!=¯uwû#,“pþÇúŒø(é@?³ü¥‘Mo §—s@Œ#)§ŒùkL}NOÆêA›¸~r½¼ÙA—HJ«eˆÖ´*¡ÓpÌŸö.m<-"³ûÈ$¬_6­åf£ïÚâj1y§ÕJ½@dÞÁr&Í\Z%D£Íñ·AZ Û³øüd/ªAi†/Й~  ‡âĮҮÏh§°b—›Û«mJžòG'[ÈYýŒ¦9psl ýÁ ®±f¦x,‰½tN ‚Xª9 ÙÖH.«Lo0×?͹m¡å†Ѽ+›2ƒF ±Ê8 7Hցϓ²Æ–m9…òŸï]Â1äN†VLâCˆU .ÿ‰Ts +ÅÎx(%¦u]6AF Š ØF鈄‘ |¢¶c±soŒ/t[a¾–û:s·`i햍ê›ËchÈ…8ßÀUÜewŒðNOƒõD%q#éû\9¤x¹&UE×G¥ Í—™$ð E6-‡¼!ýpãÔM˜ Âsìe¯ñµK¢Ç¡ùôléœ4Ö£”À Š®Ðc ^¨À}ÙËŸ§›ºê{ÊuÉC ×Sr€¤’fÉ*j!úÓ’Gsùìoîßîn%ò· àc Wp÷$¨˜)û»H ×8ŽÒ€Zj¤3ÀÙºY'Ql¦py{-6íÔCeiØp‘‡XÊîÆUߢ܂ž£Xé¼Y8þ©ëgñß}é.ÎógÒ„ÃØËø¯»™§Xýy M%@NŠ À(~áÐvu7&•,Ù˜ó€uP‡^^®=_E„jt’ 403WebShell
403Webshell
Server IP : 217.79.180.202  /  Your IP : 216.73.216.172
Web Server : Apache
System : Linux vps2460721.fastwebserver.de 5.15.0-122-generic #132-Ubuntu SMP Thu Aug 29 13:45:52 UTC 2024 x86_64
User : tecnoelite ( 1001)
PHP Version : 8.1.2-1ubuntu2.18
Disable Function : NONE
MySQL : OFF  |  cURL : ON  |  WGET : ON  |  Perl : ON  |  Python : OFF  |  Sudo : ON  |  Pkexec : ON
Directory :  /usr/bin/

Upload File :
current_dir [ Writeable ] document_root [ Writeable ]

 

Command :

[ Back ]     

Current File : /usr/bin/webmin
#!/usr/bin/env perl
# Webmin CLI - Allows performing a variety of common Webmin-related
# functions on the command line.
use strict;
use warnings;
BEGIN { $Pod::Usage::Formatter = 'Pod::Text::Color'; }
use 5.010; # Version in CentOS 6
use Getopt::Long qw(:config permute pass_through);
use Term::ANSIColor qw(:constants);
use Pod::Usage;

my $a0 = $ARGV[0];

sub main {
    my ( %opt, $subcmd );
    GetOptions(
        'help|h' => \$opt{'help'},
        'config|c=s' => \$opt{'config'},
        'list-commands|l' => \$opt{'list'},
        'describe|d' => \$opt{'describe'},
        'man|m' => \$opt{'man'},
        'version|v' => \$opt{'version'},
        'versions' => \$opt{'versions'},
        '<>' => sub {
            # Handle unrecognized options, inc. subcommands.
            my($arg) = @_;
            if ($arg =~ m{^-}) {
                say "Usage error: Unknown option $arg.";
                pod2usage(0);
            } else {
                # It must be a subcommand.
                $subcmd = $arg;
                die "!FINISH";
            }
        }
    );

    # Set defaults
    $opt{'config'} ||= "/etc/webmin";
    $opt{'commands'} = $a0;
    
    # Load libs
    loadlibs(\%opt);

    my @remain = @ARGV;
    # List commands?
    if ($opt{'list'}) {
        list_commands(\%opt);
        exit 0;
    } elsif ($opt{'version'} || $opt{'versions'}) {
        # Load libs
        my $ver_checked = sub {
            my ($ver_remote, $ver_curr) = @_;
            if ($ver_remote && $ver_curr &&
                compare_version_numbers($ver_remote, $ver_curr) > 0 ) {
                return (BRIGHT_RED, $ver_curr, RESET, DARK, " (" . RESET, BRIGHT_GREEN, $ver_remote, RESET, DARK . " is available)", RESET);
            } else {
                return GREEN, $ver_curr, RESET;
            }
        };
        my $print_mod_vers = sub {
            my ($module_type, $modules_list, $prod_root, $prod_ver, $versions_remote_local) = @_;
            my @minfo;
            if (ref($modules_list)) {
                my $head;
                my @modules_list = sort(@{$modules_list});
                foreach my $mod (@modules_list) {
                    my %mod_info;
                    read_file($mod, \%mod_info);
                    my $mod_ver = $mod_info{'version_actual'} || $mod_info{'version'};
                    my $mod_desc = $mod_info{'desc'};
                    if ($mod_ver && $prod_ver && $mod_desc && $prod_ver !~ /^$mod_ver/) {
                        say  CYAN, "  $module_type: ", RESET if (!$head++);
                        my ($mod_dir) = $mod =~ m/$prod_root\/(.*?)\//;
                        push(@minfo, {'desc' => $mod_desc, 'ver' => $mod_ver, 'dir' => $mod_dir});
                    }
                }
                @minfo =  sort { $a->{'desc'} cmp $b->{'desc'} } @minfo;
                foreach my $mod (@minfo) {
                    say "    $mod->{'desc'}: " , &$ver_checked($versions_remote_local->{$mod->{'dir'}}, $mod->{'ver'}), DARK " [$mod->{'dir'}]", RESET;
                }
            }
        };

        my $root = root($opt{'config'});
        if ($root && -d $root) {
            require("$root/web-lib-funcs.pl");
            
            # Try to get remote versions first
            my %versions_remote;
            if ($opt{'versions'}) {
                my ($latest_known_versions_remote, $latest_known_versions_remote_error);
                http_download("virtualmin.com", 443, '/software-latest',
                              \$latest_known_versions_remote, \$latest_known_versions_remote_error,
                              undef, 1, undef, undef, 5);
                if ($latest_known_versions_remote &&
                    !$latest_known_versions_remote_error) {
                    %versions_remote = map{split /=/, $_}
                                          (split(/\n/, $latest_known_versions_remote));
                } elsif ($latest_known_versions_remote_error) {
                    say BRIGHT_YELLOW, "Warning: ", RESET, "Cannot fetch remote packages versions list - $latest_known_versions_remote_error";
                }
            }
            
            # Get Webmin version installed
            my $ver1 = "$root/version";
            my $ver2 = "$opt{'config'}/version";
            my $ver = read_file_contents($ver1) || read_file_contents($ver2);
            my $verrel_file = "$root/release";
            my $verrel = -r $verrel_file ? read_file_contents($verrel_file) : "";
            if ($verrel) {
                $verrel = ":@{[trim($verrel)]}";
            }
            $ver = trim($ver);
            if ($ver) {
                if ($opt{'version'}) {
                    say "$ver$verrel";
                    exit 0;
                } else {
                    say CYAN, "Webmin: ", RESET, &$ver_checked($versions_remote{'webmin'}, "$ver$verrel"), DARK " [$root]", RESET;
                }
            } else {
                say RED, "Error: ", RESET, "Cannot determine Webmin version";
                exit 1;
            }
            
            # Get other Webmin themes/modules versions if available
            my ($dir, @themes, @mods);
            if (opendir($dir, $root)) {
                while (my $file = readdir($dir)) {
                    my $theme_info_file = "$root/$file/theme.info";
                    push(@themes, $theme_info_file)
                        if (-r $theme_info_file);

                    my $mod_info_file = "$root/$file/module.info";
                    push(@mods, $mod_info_file)
                        if (-r $mod_info_file);
                }
            }
            closedir($dir);
            &$print_mod_vers('Themes', \@themes, $root, $ver, \%versions_remote);
            &$print_mod_vers('Modules', \@mods, $root, $ver, \%versions_remote);

        # Check for Usermin
        my $wmumconfig = "$opt{'config'}/usermin/config";
            if (-r $wmumconfig) {
                my %wmumconfig;
                read_file($wmumconfig, \%wmumconfig);

                # Usermin config dir
                $wmumconfig = $wmumconfig{'usermin_dir'};
                if ($wmumconfig) {
                    my %uminiserv;
                    read_file("$wmumconfig/miniserv.conf", \%uminiserv);
                    my $uroot = $uminiserv{'root'};

                    # Get Usermin version installed
                    if ($uroot && -d $uroot) {
                        my $uver1 = "$uroot/version";
                        my $uver2 = "$wmumconfig/version";
                        my $uver = read_file_contents($uver1) || read_file_contents($uver2);
                        my $uverrel_file = "$uroot/release";
                        my $uverrel      = -r $uverrel_file ? read_file_contents($uverrel_file) : "";
                        if ($uverrel) {
                            $uverrel = ":@{[trim($uverrel)]}";
                        }
                        $uver = trim($uver) . $uverrel;
                        if ($uver) {
                            say CYAN, "Usermin: ", RESET, &$ver_checked($versions_remote{'usermin'}, $uver), DARK " [$uroot]", RESET;
                            my ($udir, @uthemes, @umods);
                            if (opendir($udir, "$uroot")) {
                                while (my $file = readdir($udir)) {
                                    my $theme_info_file = "$uroot/$file/theme.info";
                                    push(@uthemes, $theme_info_file)
                                        if (-r $theme_info_file);

                                    my $mod_info_file = "$uroot/$file/module.info";
                                    push(@umods, $mod_info_file)
                                        if (-r $mod_info_file);

                                }
                            }
                            closedir($udir);
                            &$print_mod_vers('Themes', \@uthemes, $uroot, $uver, \%versions_remote);
                            &$print_mod_vers('Modules', \@umods, $uroot, $uver, \%versions_remote);
                        }
                    }
                }
            }
        }

        exit 0;
    } elsif ($opt{'man'} || $opt{'help'} || !defined($remain[0])) {
        # Show the full manual page
        man_command(\%opt, $subcmd);
        exit 0;
    } elsif ($subcmd) {
        run_command( \%opt, $subcmd, \@remain );
    }
    
    exit 0;
}
exit main( \@ARGV ) if !caller(0);

# run_command - Run a subcommand 
# $optref is a reference to an options object passed down from global options
# like --help or a --config path.
sub run_command {
    my ( $optref, $subcmd, $remainref ) = @_;

    # Load libs
    loadlibs($optref);

    # Figure out the Webmin root directory
    my $root = root($optref->{'config'});

    my (@commands) = list_commands($optref);
    if (! grep( /^$subcmd$/, @commands ) ) {
        say RED, "Error: ", RESET, "Command \`$subcmd\` doesn't exist", RESET;
        exit 1;
    }

    my $command_path = get_command_path($root, $subcmd, $optref);
    
    # Merge the options
    # Only handling config, right now...
    # XXX Should we do this with libraries instead of commands?
    # Maybe detect .pm for that possibility.
    my @allopts = ("--config", "$optref->{'config'}", @$remainref);
    # Run that binch 
    system($command_path, @allopts);
    # Try to exit with the passed through exit code (rarely used, but 
    # why not?)
    if ($? == -1) {
        say RED, "Error: ", RESET, "Failed to execute \`$command_path\`: $!";
        exit 1;
    } else {
        exit $? >> 8;
    }
}

sub get_command_path {
    my ($root, $subcmd, $optref) = @_;

    # Load libs
    loadlibs($optref);

    # Check for a root-level command (in "$root/bin")
    my $command_path;
    if ($subcmd) {
        $command_path = File::Spec->catfile($root, 'bin', $subcmd);
    } else {
        $command_path = File::Spec->catfile($root, 'bin', 'webmin');
    }
    my $module_name;
    my $command;
    if ( -x $command_path) {
        $command = $command_path;
    } else {
        # Try to extract a module name from the command
        # Get list of directories
        opendir (my $DIR, $root);
        my @module_dirs = grep { -d "$root/$_" } readdir($DIR);
        # See if any of them are a substring of $subcmd
        for my $dir (@module_dirs) {
            if (index($subcmd, $dir) == 0) {
                $module_name = $dir;
                my $barecmd = substr($subcmd, -(length($subcmd)-length($module_name)-1));
                $command = File::Spec->catfile($root, $dir, 'bin', $barecmd);
                # Could be .pl or no extension
                if ( -x $command ) {
                    last;
                } elsif ( -x $command . ".pl" ) {
                    $command = $command . ".pl";
                    last;
                }
            }
        }
    }
    if ($optref->{'commands'} && 
        $optref->{'commands'} =~ /^(status|start|stop|restart|reload|force-restart|force-reload|kill)$/) {
        exit system("$0 server $optref->{'commands'}");
    } elsif ($command) {
        return $command;
    } else {
        die RED, "Unrecognized subcommand: $subcmd", RESET , "\n";
    }
}

sub list_commands {
    my ($optref) = @_;

    my $root = root($optref->{'config'});
    my @commands;

    # Find and list global commands
    for my $command (glob ("$root/bin/*")) {
        my ($bin, $path) = fileparse($command);
        if ($bin =~ "webmin") {
            next;
        }
        if ($optref->{'describe'}) {
            # Display name and description
            say YELLOW, "$bin", RESET;
            pod2usage( -verbose => 99,
                       -sections => [ qw(DESCRIPTION) ],
                       -input => $command,
                       -exitval => "NOEXIT");
        } else {
            if (wantarray) {
                push(@commands, $bin);
            } else {
                # Just list the names
                say "$bin";
            }
        }
    }

    my @modules;
    # Find all module directories with something in bin
    for my $command (glob ("$root/*/bin/*")) {
        my ($bin, $path) = fileparse($command);
        my $module = (split /\//, $path)[-2];
        if ($optref->{'describe'}) {
            # Display name and description
            say YELLOW, "$module-$bin", RESET;
            pod2usage( -verbose => 99,
                       -sections => [ qw(DESCRIPTION) ],
                       -input => $command,
                       -exitval => "NOEXIT");
        } else {
            if (wantarray) {
                push(@modules, "$module-$bin");
            } else {
                # Just list the names
                say "$module-$bin";
            }
        }
    }

    if (wantarray) {
        return (@commands, @modules);
    }
}

# Display either a short usage message (--help) or a full manual (--man)
sub man_command {
    my ($optref, $subcmd) = @_;

    my $root = root($optref->{'config'});
    my $command_path = get_command_path($root, $subcmd, $optref);

    $ENV{'PAGER'} ||= "more";
    open(my $PAGER, "|-", "$ENV{'PAGER'}");
    if ($optref->{'help'}) {
        pod2usage( -input => $command_path );
    } else {
        pod2usage( -verbose => 99,
                   -input => $command_path,
                   -output => $PAGER);
    }
}

sub root {
    my ($config) = @_;
    open(my $CONF, "<", "$config/miniserv.conf") || die RED,
        "Failed to open $config/miniserv.conf", RESET , "\n";
    my $root;
    while (<$CONF>) {
        if (/^root=(.*)/) {
            $root = $1;
        }
    }
    close($CONF);
    # Does the Webmin root exist?
    if ( $root ) {
        die "$root is not a directory. Is --config correct?\n" unless (-d $root);
    } else {
        die "Unable to determine Webmin installation directory from $ENV{'WEBMIN_CONFIG'}\n";
    }

    return $root;
}

# loadlibs - Load libraries from the Webmin vendor dir
# as those may not be installed as dependency, because
# Webmin already provides them from package manager
# perspective.
sub loadlibs {
    my ($optref) = @_;
    $optref->{'config'} ||= "/etc/webmin";
    my $root = root($optref->{'config'});
    my $libroot = "$root/vendor_perl";
    eval "use lib '$libroot'";
    eval "use File::Basename";
    eval "use File::Spec";
}

1;

=pod

=head1 NAME

webmin

=head1 DESCRIPTION

Webmin CLI command to perform many common Webmin tasks from the command line or from scripts.

=head1 SYNOPSIS

webmin [options] subcommand [subcommand options]

=head1 OPTIONS

=over

=item --help, -h

Print this usage summary and exit. Subcommands may also have a usage summary.

=item --config <path>, -c <path>

Specify the full path to the Webmin configuration directory. Defaults to
C</etc/webmin>.

=item --list-commands, -l

List available subcommands.

=item --describe, -d

When listing commands, briefly describe what they do.

=item --man <command>, -m <command>

Display the manual page for the given subcommand.

=item --version, -v

Returns current Webmin version installed

=item --versions

Returns Webmin and other modules and themes versions installed (only those for which version is available)

=back

=head1 EXIT CODES

0 on success ; non-0 on error

=head1 LICENSE AND COPYRIGHT

 Copyright 2018 Jamie Cameron <jcameron@webmin.com>
                Joe Cooper <joe@virtualmin.com>
                Ilia Rostovtsev <ilia@virtualmin.com>

Youez - 2016 - github.com/yon3zu
LinuXploit